Start   Products   Order   Contact   Imprint   search   terms

USB Line Camera                                                            

The USB Line Camera is an easy-to-use cost-effective board-level line scan camera. It consists of two circuit boards, the main circuit board and the sensor circuit board. The main board contains the high speed USB controller, the line sensor controller and Memory. The sensor board contains a CCD or a CMOS line sensor and a complete 16-Bit imaging signal processor (AFE), which consists of an input clamp, Correlated Double Sampler (CDS), offset DAC, Programmable Gain Amplifier (PGA) and high-performance 16-bit A/D converter. The main board supports multiple sensor boards for various sensors with different number of pixels. Thus it is possible to exchange the sensor board at any time.

 

Furthermore, the main board has an I2C interface, which allows the control of external hardware such as IO Expander, stepper motor, ADC, DAC, temperature sensors, etc.

 

The USB Line Camera is USB Bus-powered, therefore no separate power adapters for voltage supply are needed. The maximum power consumption is less than 500mA.

 

Ready to use software, drivers, DLL and sample programs are included in delivery.

USB Line Camera
USB Line Camera

Features:

 

  • 480 Mbit/s high-speed USB 2.0
  • USB Bus-powered
  • Plug & Play
  • Supports various CCD and CMOS line sensors
  • 16-bit high-speed ADC
  • Correlated Double Sampler (CDS)
  • 1~6x Programmable Gain, 64 increments
  • ±300 mV Programmable Offset, 512 increments
  • 2 programmable internal reference voltage 2V and 4V
  • Trigger input
  • 100kHz I2C-Master Interface
  • Ready to use software, no installation required
  • Software development kit with drivers, DLL and sample programs
  • Supports Windows, Linux and Raspbian (Raspberry PI)
  • Very compact design 66 x 48 x 7.7 mm³ (without sensor)
  • Integration time and frame rates are CCD/CMOS line sensor specific. For further information please refer to the manual of corresponding sensor circuit board.

 

If higher frame rate or synchronization of multiple cameras is needed, please see the USB Line Camera 8M

Price:

See below

 

included in delivery:

USB Line Camera, Manuals,

Windows: Software, DLL and Examples for Delphi, C++ Builder, VC++, VB and Labview.

Linux: Library (.so, 32 & 64Bit) and

Examples for Lazarus and Qt.

Raspbian (Raspberry PI): Library (.so) and Examples for Lazarus and Qt.

 

Manual & files:

Manual

Windows DLL Manual

Linux LIB Manual

Programming examples (Windows)

Programming examples (Linux)

Programming examples (Raspberry PI)

Software (Windows)

Driver (Windows)

Available cameras / sensors:

Sensor

ILX554B

ILX553B

ILX751B

TCD1304DG

Sensor Type

CCD

CCD

CCD

CCD

Active pixel

2048

5150

2048

3648

Pixel size [µm]

14 x 56

7 x 7

14 x 14

8 x 200

Min. Integration time [µs]

1053

2718

3

10

Sensivity [V/lx .s]

240/3500

14.8

40

160

Dynamic Range

333

6666

6000

300

Wavelength range [nm]

400-1000

400-1000

400-1000

400-1000

Max. frame rate

364

254

475

132

Part number

#060102 *

#060103 *

#060104 *

#060105

Price excl. VAT

239,-EUR

259,-EUR

259,-EUR

259,-EUR

*) ILX554B, ILX553B and ILX751B: Available until stock is exhausted

Sensor

S11108

S12706

S11638

S11639-01

Sensor Type

CMOS

CMOS

CMOS CMOS

Active pixel

2048

4096 2048 2048

Pixel size [µm]

14 x 14

7 x 7 14 x 42 14 x 200

Min. Integration time [µs]

27

27

27 27

Sensivity [V/lx .s]

50

23 160 1300

Dynamic Range

4000

10000

3000 10000

Wavelength range [nm]

400-1000

400-1000 200-1000 200-1000

Max. frame rate

900

440

900

900

Part number

#060106

#060109

#060108 #060107

Price excl. VAT

279,-EUR

310,-EUR 339,-EUR 379,-EUR