Start   Products   Order   Contact   Imprint   search   terms

I2C IMT901 Controller                                      

I2C IMT901 Controller

The IMT901 I2C controller enables easy interfacing an IMT901 circuit to an I2C-bus. The IMT901 is a microstep stepper motor driver. Communication between a host and the IMT901 I2C controller takes place via the two wire bi-directional seriel interface (I2C). Theoretically, it is possible to connect up to 64 devices on the same bus. Slave adress is programmable via controller EEProm.

 

Some features of the controller:

  • Speed in 59 stages (100 - 6000 cycles per second) adjustable
  • Communication is made by I2C interface
  • Control for one IMT901 - microstep stepping motor driver
  • 1/1-, 1/2-, 1/4-, 1/8- microstep adjustable
  • Current reduction
  • Internal 32 bit position counter
  • Limit switch with different options
  • Speed in 59 stages adjustable (100 - 6000 Steps/Sec)
  • Acceleration in 5 stages adjustable
  • Motor RUN, or run to a Target position
  • All parameters read/write
  • Status information read
  • Programmable slave adress
  • Save options and data (e.g. position of motor) in EEProm.

With one of our I2C Adapter e.g. RS232 I2C Adapter  it is easy to hog the appliance of the IMT901 I2C controller and to evaluate its features.

Price:

12,95 EUR plus VAT & shipping.

 

included in delivery:

I2C IMT901 Controller

(PLCC28 Package)

 

Manual:

download